Galvanised Palisade Fencing

Product Description

Palisade fencing

 

Palisade fencing for South Africa like Durban & Cape Town is widely found as a result of its high strength, high security and lower cost. Different from standard angle pale palisade fencing by EN BS 1722-12, security palisade fence in Africa area is usually manufactured by hot-rolled angle steel, which greatly cut the cost. The steel angle pale not only has spikes on top but also spikes on the body, which basically resists any unwanted people even animals like a cat. They could be installed around residential area, schools, governments or commercial places where high security is urgently needed.

 

These anti-climb fencing are often provided in panels which will be pre-assembled in the factory. Of course this reduces installation time and difficulty, but it increases the delivery cost.

 

Razor palisade fencing description:

 

Item: razor palisade fencing.

Head type: 3-spiked top.

Palisade pale: hot-rolled angle steel.

Angle steel size: 40 × 40 × 2mm, 40 × 40 × 2.5mm.

Body type: 10 razor-like spikes on each side.

Width: up to 3m.

Height: 1.80m, 2.0m.

Surface treatment: galvanised & powder coated.

Post: RSJ Beam - 76 × 76 × 1.6 × 2400mm.

Assembly: welded palisade fencing panel.

 

Heavy-duty razor palisade fencing description:

 

Item: heavy-duty razor palisade fencing.

Head type: 3-spiked top.

Palisade pale: hot-rolled angle steel.

Angle steel size: 40 × 40 × 2mm, 40 × 40 × 2.5mm.

Body type: 10 razor-like longer spikes on each side.

Width: up to 3m.

Height: 1.80m, 2.0m.

Surface treatment: galvanised & powder coated.

Post: RSJ Beam - 76 × 76 × 1.6 × 2400mm.

Assembly: welded palisade fencing panel.

NOTE: spikes on each side of angel pale could be customized as your requirement. Besides, they're a little longer and more threatening.


Standard Specification

PALISADE FENCING PANELS

Available HeightsNr of Pickets / PanelPanel ApertureCross Carrier
3 Spike Palisade0.30 – 3.0m high18110 mm40x40x2
3 Spike Palisade0.30 – 3.0m high17119 mm40x40x2
7 Spike Palisade0.60 – 3.0m high18110 mm40x40x2
7 Spike Palisade0.60 – 3.0m high17119 mm40x40x2
Large Flower Palisade0.30 – 3.0m high17115 mm40x40x2
Devils Fork Palisade0.30 – 3.0m high17133 mm30x30x2
PALISADE GATES

Frame sizeAvailable Heights
Pedestrian Gates50x25x1.601.5 – 2.4m high
Sliding gates <4.5m76x38x1.601.5 – 2.4m high
Sliding gates >4.5m – 6.0m100x50x21.5 – 2.4m high


028.jpg

86 133 1515 2425 victormeng55555@outlook.com sales@metalmeshfencing.com 870110354